Power Stop Brake Kit - Z36 Truck & Tow Brake Upgrade Kit F+R [ 2011 - 2024 Chevy/GMC 2500/3500 SRW ONLY]

• Z36 Carbon-Fiber Ceramic Brake Pads
  Severe-Duty stopping power designed for trucks & 4x4s
• Premium Stainless-Steel Shims
  Better heat dissipation & virtually noise-free braking
• Drilled, Slotted & Zinc Plated Rotors
  Provide maximum cooling and helps protect against rust and corrosion
• Premium Stainless-Steel Hardware & New Pin Bushing Kit (where applicable)
• Hi-Temp Brake Lubricant

PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes - no matter where or how they use their vehicle. Our Z36 Truck & Tow Brake Upgrade Kit is recommended for trucks, 4x4s, and SUVs that not only work hard, but play hard as well. This brake pad and rotor kit comes with everything you need, including premium stainless-steel hardware, for an easy, bolt-on installation. The low-dust Ceramic brake pads are reinforced with Carbon-Fiber to provide severe-duty stopping power without sacrificing everyday drivability. These pads are paired with Drilled & Slotted rotors that keep brake temperatures down by maximizing heat dissipation, critical for those long mountain descents. Whether towing a boat or trailer, hauling for the jobsite, or tackling a tough off-road trail, get the easy and affordable, bolt-on performance upgrade with the Z36 Truck & Tow Brake Upgrade Kit.

Break in your PowerStop Brakes as follows:

• 1

  Complete 5 moderate to aggressive stops from 40 mph down to 10 mph in rapid succession without letting the brakes cool and do not come to a complete stop. If you're forced to stop, complete the stop and either shift the vehicle into park or give room in front so you can allow the vehicle to roll slightly while waiting for the track light. The rotors will be very hot and holding down the brake pedal will force the brake pad to contact the rotor and possibly create an imprint on the rotor. This imprint may contribute to the creation of brake judder.

• 2

  Continue the break in by completing 5 moderate stops from 35 mph to 5 mph in rapid succession without letting the brakes cool. You should expect to smell some resin as the brakes get hot. After this is complete, continue to drive the vehicle for as long as possible without heating the brakes excessively and without coming to a complete stop (Try for about 5 minutes at moderate speed). This is the cooling stage.

• 3

  Once this is completed and the brakes have cooled to standard operating temperature, you may use the brakes normally. Never cool your brakes with water, as this can damage them.

   

  The PowerStop Difference

  

  Brakes You Can Trust

  We’re bringing quality brakes to every vehicle on the road. Because when we can all stop better, the roads are a safer place.

  

  The Easy Way to Upgrade

  Our brake kits have everything you need to get rid of weak brakes, and it’s all delivered in one box.

  

  STOP QUICK. STOP CLEAN.

  Made with our carbon-fiber ceramic formula to reduce brake dust & eliminate noise.